NZXT N9 Z890 - Intel Z890 LGA 1851 ATX Gaming Motherboard for Core Ultra (Series 2) - 20+1+1, DDR5, 5X M.2, PCIe 5.0, Wi-Fi 7, 5GbE, Thunderbolt 4 - RGB, Full-Metal Cover - Black

The NZXT N7 Z790 ATX Motherboard is a fantastic addition to my PC build. The clean, all-black design fits perfectly with my aesthetic, and the covers for unused components give it a sleek and streamlined look. The build quality and attention to detail are top-notch. My only minor issue was that it couldn't accommodate an M.2 SSD with a heatsink, so I had to swap for one without. However, this was more of a hassle with the SSD manufacturer than the motherboard itself. All the built-in features work flawlessly, making this a great choice for anyone who appreciates both style and performance. It completed my nearly all-NZXT build perfectly, and I highly recommend it!

Very clean don't mind aio not there, aio is coming tomorrow it's a kraken plus white. This is a great motherboard with a lot of really nice features, the m.2 was really easy to install and has a heat sink. I paired it with crucial ram to match the look, ide recommend you plug fans on the bottom and not the top of you are trying to make a sleek build,

Works perfectly Has great durability. As I bought it for nearly half price, I also got great price to performance. Heat sinks are fine, easy to install, manage and etc. Has many I/O ports, 5x M.2 NVME, 4x SATA and etc. which makes it way better.

Looks very clean in my build with the hate y60 white with black interior, the software is a little odd to me though. When I finished installing it my ID cooling fans were white and once I got the software only the rainbow setting works otherwise no lights light up

So apparently NZXT is putting a fancy armor on Asrock boards & rebranding them. Was going for a white and black build and this seemed like the nicest z790 board aesthetically. I had to buy a cheap i3-12100 dummy CPU with built-in graphics to be able to update the BIOS to support a 14th Gen 14900K CPU, since this time around it seems NZXT (Asrock) removed the BIOS flash button in the I/O area. This board just had so much trouble trying to POST. I wouldn't even make any changes after managing to finally get into Windows and then a few boots later it would resume failing to POST. Trying to POST would take quite a while as well in most cases. Another issue was losing video to the monitor, regardless if it was coming from the CPU, or the GPU. My display would blink black, then come back moments later. It wasn't a GPU issue either and I'm using both the same CPU (14900K) and GPU (4090) with a different motherboard now. This was my first time using what in reality is an Asrock board and it will be my last. This thing was an unstable nightmare.

I purchased this board almost exclusively for the looks. The finish on the heatsinks of the black version do mark easily against your finger nails (especially when installing your CPU cooler), but can easily be wiped off with a cloth. No biggie. I also bought it because of the advertised intel 14th gen support. Yes, this board supports 14th gen intel processors. However, mine shipped with bios version 3.01 which does not support the I7-14700KF that I put in it. Instead when I started the computer I got VGA and Boot lights with no display. After some trouble shooting I drove to best buy and bought an I7-13700K which started right up and allowed me to flash the bios to the most recent update (7.01) which includes support for 14th gen CPUs. Swapped back in my 14700kF and it works great. Your milage may vary with 14th gen chips depending on what bios version the board ships with. This board also doesn't play nice with some 4000 series Nvidia cards. From what i can gather some motherboards will not output video through some 4000 series cards without the most recent Nvidia driver installed. If you're installing a fresh copy of windows there are no drivers and thus no video. The only way around this is to have a k version of intel chips so you can use the onboard graphics. (I regret trying to save a few bucks by buying a KF rip) However, Nvidia will not install the drivers if it does not detect a graphics card. You have to start you PC with the GPU unplugged, go into the Bios and switch the display output from auto to integrated. This allows you to get display output from the integrated graphics and allow the Nvidia drivers to detect your card and install the proper driver. Once you've installed the driver you can go back to the bios and switch it back to auto. I hope this helps some people as it was a pain for me to figure out. I believe this is a good board, but depending on the hardware you're installing it can be a headache. It is currently working great with a 14700KF chip and an RTX 4080. (I returned the 13700K to BestBuy after updated the bios and installing the display drivers. Sorry BestBuy).

This is a super sexy board that will make an all white build look amazing. Underneath it's an AsRock board with an NZXT custom BIOS that is prety easy to use. The only gripe I have with the IO is no BIOS Flashback button so keep that in mind if you are going with the Z690 model and are running 13th or 14th Gen. Also if you aren't running NZXT fans the CAM software is kinda terrible IMO but you don't have to use it. If you are building a clean white PC this board is a must buy

Hermosa placa y totalmente funcional.

Muy bonita y todo pero está cochinada luego de 2 semanas de uso de la nada se brikeo y ya no quiso encender

Fisicamente tiene una apariencia como producto de gama alta, pero tiene grandes deficiencias tecnicas. - No tiene un boton para update - No tiene una usb asignado para update - Se necesita un procesador intel 13th obligatoriamente. Lo que la hace inutilizable con la generación 14th. - La documentación del producto es nula, encontraras más soluciones con reddit. El manual solo es una hojita de datos que te dice donde va el USB. - Las coberturas imantadas estan mal diseñadas y al recolocarse puedes dañar el cromo. - Sin documentación no te enteras que hay una limitada linea de RAMs compatibles - Una limitada linea de RTX40 compatible - Recomiendan esperar entr 5-60 minutos en el primer boot, por la mala configuración - Algunas RAM las debes bootear una por una, conectas, prendes y apagas, conectas la siguente y repites. Estos son solo algunos de los problemas que me sucedieron y pude documentar.

A nice motherboard with plenty of M2 slots for NVME ssd. Pretty decent and great working when the LEDs get lighted up. Decided to return as the board was defective (1) LED only lighted up in 2 sections while the 3rd section did not work (2) the plastic covering certain parts of the board seems to be pasted back badly. Well, it did boot up during installation but not sure if it will install. Did not like all these problems.

とにかくかっこよいので性能ではなく見た目で買ったが不満は無い。たしかにスペックはさほど高くはないので性能を求めるなら別を買うべき。しなしCPU補助電源が片方を半分にしなければならないのでマザーボードをつける前に刺した方が指にとっていいと思う。

Despues de haber cambiado varias veces de z890 por errores y inestabilidad porfin he encintrado una que sirve para un ordenador tan potente como el mio, con una 5090 y un core ultra 9 y 128gb de ram, va perfecto y ademas es elegante, no como asus o msi que parecen discotecas.