Z890M AORUS Elite WIFI7 ICE Ultra Core (Series 2) LGA 1851, ATX, DDR5, 3X M.2, PCIe 5.0, Thunderbolt 4, WIFI7, 2.5GbE LAN, EZ-Latch

Absolutely fantastic motherboard. Easy to quick tweak settings in BIOS or go all out with access to complete voltages and timings. I am all about performance and this board has it. Im using a Ultra 265k and one bench is using a 5070 card and the other 2 are using a 5070TI for reference. Great quality board and another great board from Gigabyte. To be fair, I am a Gigabyte only person anymore. Easy to set up and configure. I will say that I did not see any performance decrease when using the GPU in gen5x16 with a Gen5 NVME. The newer Ultra chips have more PCI lanes so you dont have to worry about any performance caps when using both. This is a solid board with great performance, lots of fan headers and ARGB connectors as well as a built in Thunderbolt 4 which can also provide a 20Gb network connection. Everything is solid and works great.

Putting together a computer can involve accidental abuse of components. You slide around the motherboard trying to get it lined up, you press a little too hard in some areas, you exert too much pressure trying to get the CPU cooler on. You screw things in too tight. Stuff happens. Installing this thing, I was a bit rough, but this thing didn't even care. It took the punishment and worked great first try. I wanted to do a q-flash plus on it before first boot because I'm running an i9-14900kf. So it was only barely half assembled when I pushed the q-flash button. I half expected it to not work at all, but it worked first try! Aaaand then after the flash it tried to boot, which was only bad because I hadn't installed the CPU cooler yet, but hey, the bigger take away is that technically it booted first try. So then I assembled everything else, again I was a bit rough in the process. Again it worked first try when it was all finished. Build quality is really good, this is clearly a premium board. It auto detected and set up all my fans and my pump, which was nice. I wasn't sure how the pump thing was going to work. I plugged my AIO pump into the system fan/pump connector, and it just worked first try, no setup required. That's what you get when you pay for a board like this, it actually works first try with no setup. Aesthetically it looks nice in person, but maybe not as nice as the back mount boards, but still nice. The connectors for fans and power and all that run along the bottom which is okay I guess, although it made cable management a little weird. In terms of value for money, this thing does cost a lot of money, so I wouldn't call it a value, but I will say you are getting what you paid for. You're paying for a $300 motherboard, and you're getting a $300 motherboard, it is exactly what you're paying for, it is quality, and you're paying for that quality. It is very nice, and I have no regrets.

I am a first time PC builder and don't have any issues with this motherboard. The build quality is extremely sturdy and has great connectivity options for future expansion. The E-Z latch mechanisms make SSD and GPU installations easy. I bought this motherboard specifically for gaming capabilities which well with my Gigabyte 5070ti. The motherboard handles various tasks including gaming, fantastically. A manual that tells you everything about the board does not come inside the box. You must go to Gigabyte's website to find it. There were times during the build where a physical copy would've been helpful considering that I'm building a computer for the first time. It does come with a pictographic guide that helps you connect things together. This Z890 motherboard fits in my pc case perfectly and allows for enough room for optional PCIE expansion in the future. The Aorus Elite Wifi 7 is not a power-hungry motherboard. I bought a corsair rm1000x psu for my build and everything runs smoothly. Overall, I'm happy with my purchase and will potentially buy more gigabyte boards for future builds.

EDIT: After some testing with new parts and tinkering with settings, I've figured that the main issue stemmed from the RAM, not the motherboard. I've never used DDR5 before so maybe it's something to do with that, but I've found it impossible to use at full speed and have it be stable. Never ever use XMP. I've learned my lesson there. Also fixed my issue with boot up times/lighting not starting properly by messing with ErP and Fast Boot settings in the BIOS. Glad I get to use this board, it's got wonderful I/O and it's simple enough for what I need. ORIGINAL: Just built my new PC and this motherboard has given me the most issues out of any parts by far. To start off with the bad, it has some power issues, fan lights will often not turn on or off alongside the PC, it takes a while to start up most of the time, and I can not use my RAM to its fullest speed. Using the motherboard's built in XMP with 4x16GB DDR5-6400 MHz RAM causes only crashes when using the PC. (memtest shows 0 errors with the RAM itself.) Games will crash quickly and sometimes the entire system just blue-screens or freezes, and every time it's related to the XMP, and I know this because going to a lower XMP profile, it works fine. Still a few crashes but it's never anywhere near as bad as using it at full speed. This motherboard also just has some build quality issues. USB-3 plugin came off with the connector, making the pins exposed. Thankfully it still works, but that's definitely not reassuring when it comes off that easily. As for the good, this motherboard has a lot of I-O. 4 USB 2.0 ports on the back for your keyboard, mouse, etc. is always nice. Lots of USB 3.0 ports and also tons of slots on the motherboard itself. The NVME storage is very nice and has a good built-in heatsink for them. The motherboard itself also looks super clean, and is incredibly simple to install. This motherboard definitely has a lot of potential, it's possible I got a faulty board, and if I get more problems I'll definitely end up getting a new one from a different brand. But, if you wanna take a chance, then this one could definitely work. For now, I think there's a lot of issues that need ironing out and if you plan on getting high-end parts, you may want to look for something with more assured quality.

Very good purchase runs my i9 14900k straight out the box no need for bios update has multiple argb headers for the ppl that like their machine lit up. Handy that the board has 5 x m.2 slots for lots of storage all in all a very good purchase

the packaging had no damage but on unboxing the product. I found out the Ram clipping lock and the Gpu lock broken. Did not expect a product like Gigabyte will deliver such poor quality.

Arrived in good time!

Don't buy this motherboard I only use it for 3 month and suddenly it stopped working after that I sent it to service centre for repair after that they said the motherboard is dead

Excelent