ROCKBROS MTB Pedals Mountain Bike Pedals Lightweight Nylon Fiber Bicycle Platform Pedals for BMX MTB 9/16"

These replaced my worn out Chesters . Every rider should have some composite flats like these to compliment clipless pedals . My initial thoughts are very positive given the affordable price point. Bike components have gotten outrageous. On the positive side, build quality is good, the chromium spindles are well forged. The bearings have been set and greased well. The pedals rotated smoothly with consistent grease drag on initial installation. Both pedals had equal drag with no apparent jams or air bubbles which can be common on new pedals. I weighed them at 373 g -- very close to the 365 g spec which is about nominal for composite pedals. 350 is good, 450 is heavy and 550 would be a joke. I was impressed that the vendor shipped spare traction pins . Also the installed pins are well coated. In my case I may remove the pins to avoid damage to my shoes. I'm really impressed at the pin quality and spare pin inclusion. On the downside the packaging isn't great and that's acceptable. The CR-R / CR-L spindle stamping is sloppy and will collect dirt / mud -- i would have preferred a removable sticker to keep the design clean. Overall initial review is very good. I'm mostly impressed by the build quality and the smooth rotation. Many budget pedals will have either grinding bearings or grease friction making rotation rough. Great work RockBros and thanks. I'll update after a few rides.

I've seen this brand before but was hesitant due to the price seemingly very low but I was honestly surprised and glad I tried it out to replace my Stamp 1 pedals that the pins were corroded and worn out; so much so that I couldn't get some of the screws out without stripping it so it was time for new. Stamp 1 needs to take note... The Rockbros pedals are hair smaller, but not by much. The weight and overall feeling of the pedals on my 60 lbs e-bike is very grippy and I did a 20-mile ride with no issues. I usually stand on my bike a lot with my 230 lb frame. I still prefer the 14mm wrench to install or take off the pedal as it's easier to take them off when needed especially. The bearings are okay for the price and work as should. People may scoff at Nylon but unless you're doing some serious grinding against the pedals or weigh a bit bodyweight-wise, these are perfectly fine for most riders.

After almost 1 year and 3,400 miles on my MTB (all street riding): These pedals stopped my running shoes from slipping around as they did on my original cheapo quill-type MTB pedals. These pedals might even grip better if my running shoes had flat bottoms with no cut outs and hard plastic arch supports molded into the soles. But that's not the pedal's fault. When new, the bearings were smooth and had some very slight drag when spinning the pedals by hand, but that was to be expected with precise-fitting new bearings. Now, 3,400 miles later, the left pedal still feels like new (slight drag), but the right pedal is looser on the pedal spindle and I can hear an intermittent clicking noise if I spin the pedal fast by hand. I never hear any noises while pedaling though. I'll have to watch the right-side pedal to make sure it doesn't loosen up more on the spindle. After 3,400 miles maybe the right pedal bearings are wearing some? To Rock Bros credit, I emailed them about it and they said I could send a video of the pedal making noise when I spin it and they would advise me further. On the pedal width, my running shoes hang over the outer edge of the pedal a little so I wouldn't mind if the pedals were a little wider.

These pedals were an amazing upgrade. I ride in all kinds of weather and used to slip on my old pedals, but these are slip resistant and thicker, so they completely fixed that problem. I also love how they make my bike look more aggressive and professional, and the price was really reasonable. I’m giving them 4 stars because after a few months of riding in the rain, the metal parts started to rust a little. It doesn’t affect the slip-resistant function at all, so it’s more of an aesthetic issue than a functional one.

Very well assembled. Quality not a cheap pair. Solid

Solid pedals that have great grip... until they don't. ***YOU MAY ALSO LIKE*** ((((((((SHIN GUARDS)))))))))

I purchased the RockBros Lightweight Mountain Bike Pedals for my eMTB, and I must say, they exceeded my expectations! These pedals are fantastic and offer an unbeatable combination of performance, comfort, and durability. I have riden with them for over a year and I am back to buy another pair for another bike! These are very lightweight and offer a great combination of nylon with metal cleats. The nylon slides much better on rocks when mountain biking and the metal cleats don't break and hold incredible. Another remarkable feature is the smooth and reliable bearing system. The pedals spin effortlessly, which not only makes my rides smoother but also adds to the longevity of the pedals themselves. They still perform incredible over a year later! What really impressed me was the affordability of these pedals without compromising on quality. They feel just as good as some of the more expensive brands I've tried in the past.

I think these are copies of another pedal that is exactly the same; but these are fine pedals. The pins provide great traction (in fact, they "lock into" the soles of my shoes quite well". The pins are replaceable with M3x10mm cap head screws. The spindles are true. I've got 2.5 years on my first pair and I'm very happy with them.