for Dell Motherboard with 6 Pin Port 24 Pin to 6 Pin ATX PSU Power Adapter Cable 13.3-inch(34cm)

Came next day perfect fit

A little pricey but the delivery time made up for it, just finished work though and noticed the delivery driver didn't put it somewhere safe and was resting against the door in sight for all to see, thankfully it wasn't stolen but it was raining outside and the outer packaging was damaged but with some luck the main packaging was dry. Besides that though the item is reasonable sized and isn't too long nor damaged and as much as I'd give it a 5 star I'll have to give a 3 because of how it was delivered and left out. Honestly would've thought the delivery driver would've used some initiative when putting it somewhere safe.

This mostly works okay if you need to fit a 24-pin PSU to your SFF Dell (for example, to upgrade the video card). There is only one problem: none of this type of cable is able to switch off the PSU, so even though your PC is off, or asleep, the fan will keep going. It's not the fault of this particular cable, though (which is as good as any other out there, but cheaper). Just bear in mind that as well as powering down the PC, you will need to also switch it off at the mains (or the PSU switch) if you don't want the PSU fan going all the time.

Partly works, it's not fully compatible with my Dell Optiplex 5060. The system powers hardware when turned on from wall. When PC is turned off hardware stays on. It power everything, just not when you want it to. The green cable is bridged to the wrong pin so the "POWER_OK" and "POWER_ON" doesn't work. Test again with Dell PSU runs fine, so it's not BIOS problem, jumper problem, or a board short problem I've had to buy another adaptor that appears to have the correct pin out.