FLEXISPOT EN1 One-Piece Standing Desk, 40"x24" Seamless Desktop Electric Height Adjustable for Home Office, Study Rooms & Multi-Device Workstations, Maple(White Frame)

I've used high-end electric desks at work, and since you typically get what you pay for, I was a bit wary of buying one for home that was so relatively inexpensive. But overall the reviews were positive enough (especially regarding customer service) and there were some good tips regarding assembly, so I figured it was worth the risk. Both boxes arrived with the contents in perfect condition: the boxes used very thick, heavy cardboard, and the corner protectors on the desktop were made of a very dense rubber. I've unpacked a lot of furniture (assembling desks for classrooms and computer labs), and the packaging for this desk puts many so-called "commercial" products to shame. Any damage that might occur would be due to careless shipping and handling - not how the factory packed it. Assembling the desk was straightforward enough, although I've put together enough of this sort of furniture over the years that there weren't any surprises. Just take your time, follow the steps, and you'll be fine. This can be assembled by one person, but a second set of hands will make things easier. All of the pre-drilled holes lined up where they were supposed to. One assembly tip: line up one of the end holes in a leg with its corresponding hole in the desktop, and drop a thin nail into the hole to give it something to pivot around. Then with that hole aligned, line up each of the other holes, again dropping a thin nail into each one until they're all aligned. Then drive the screws, replacing each nail, one at a time. No guesswork, no misaligned screws, no do-overs. The only two pilot holes I had to add were for the center crossbar, so you will need a drill and a small bit (a hand drill or pin vise would work for this). For driving all of the screws I used a hand screwdriver, so I wouldn't run the risk of stripping out the particle board. Everything went together very nicely. There were no stripped threads or alignment issues. Overall, I felt the quality of the desk and and the fit and finish of the parts were excellent and exceeded my expectations. The motor operates pretty quietly, and raises and lowers the desk just fine, even with a bunch of stuff piled on top of it (I don't plan on testing what its limits are - it holds what I need). I had an error message pop up on the controller once when I attempted to recall a saved height, but unplugging the desk from power and reconnecting it resolved that. No issues since. The desk is solid and stable. At its higher settings it will sway a little bit when leaned on, but that's just physics at work - if you need something that's really solid at full height, get something with four legs instead of two. The only (minor) gripe that I have is that the cords could be a bit longer: the one for the control panel so you could reposition it if you needed to; and the power cord which barely reaches the width of the desk. I'm very pleased with this purchase. It met my budget, and exceeded my expectations. It's a good-looking, solid, quality desk. Hopefully it'll hold up over time - but so far, so good!

We recently purchased a Flexispot EN1 with 24x48" top for my wife's remodeled home office. Assembly was easy with well-written instructions. She subsequently decided that, also she liked the sit/stand feature, in her small space, she needed a traditionaldesk with drawers for storage. So, we are moving the EN1 to my office. I felt I needed a bit more width and contacted Flexispot support via chat to ask if larger desktops are compatible with my frame. Selwyn was very helpful. He explained that desk top widths up to 63" are compatible with my frame, and that I can adjust the distance between the legs on my unit so that there is a 3-5" overhang on each side. I am exremely happy with the quality and value of my desk, and with the excellent tech support from Selwyn.

This table arrived early and was very well packed. It is very heavy and you may need help with lifting and assembly. My sewing room is on the second floor. Senior citizen husband was able to put it together himself but it was not easy. The lift mechanism was actually easy to install and works as expected. The back of the table does not hit the wall but the foot frame does. I have a big sewing machine and the table and machine do not vibrate at all. There is enough room under the table to use a small rolling cart for accessories. The Flexispot table was on sale when I purchased but I would pay full price given its quality and usefulness.

The FLEXISPOT EN1 Standing Desk offers excellent value for its price — it’s sturdy, smooth to adjust, and provides plenty of workspace without taking up too much room. The motor is quiet and reliable, making it easy to switch between sitting and standing throughout the day. Assembly is generally straightforward, but one minor issue I ran into was aligning the holes for the leg brackets. It can be difficult to see if they’re perfectly lined up, due to the black gaskets to sink the screws into which makes that step a bit frustrating. Once everything is in place, though, the desk feels solid and stable. Overall, this is a great desk for anyone looking to upgrade to a sit-stand setup — just be prepared to spend a little extra time during assembly to get those brackets positioned correctly.

Very good quality. Put it together myself (60F) in less than an hour. Love that the desktop is one solid piece. Easy to program your saved height adjustment. Moves smoothly when raising and lowering. Quiet. This desk is great value for the price. 100% recommend.

I was very impressed with this purchase for two reasons: (1) the quality of the desktop (55"x28") and, (2) the excellent customer support from the vendor Flexispot. (1) I purchased this particular desk because it has a 1" thick, one-piece desktop. Many electric desks have similar characteristics, but with a thinner, two piece desktop, while this one has the thick desktop, making the entire unit very stable. The construction quality is top-notch, and I really didn't expect to get such a quality product at the low Amazon price. (2) There was a slight discrepancy in the provided hardware package, so I contacted the Flexispot Customer Service section. They responded very quickly, made arrangements to ship me the hardware, continued to advise me of the package's delivery location, and followed the shipment until it arrived. This was the best customer service I have received in a very long time. Finally, they made sure that I was satisfied with the end result.

Really like this desk. Arrived in perfect condition, all parts were accounted for, no damage, aligned screw holes, and instructions were a bit vague, parts were not labeled but it did have illustrations. Not terribly difficult to put together, but perhaps a video link would help some. The up and down motion is very smooth, and it's range is great. I'm using it with a walking pad I bought and it's big enough to give me great room for my PC monitor and keyboard to fit perfectly. It looks really sleek and modern. I would definitely recommend this to anyone looking for an inexpensive standing desk. Just as good as the high cost ones.

Amazing desk, it has a nice height adjustment,, a little scratch resistance but don't damage it purposely, great for regular desk use for gaming if you choose so, the only problem I had was that the wood may seem a little small in height, so I'm not so confident on the desks ability to actually hold my monitors clamped arm onto it, thats why i bought reinforcement steel plate for it, but it holds it nicely, although im still not convinced, I do wish it was a little larger for its height. Assembly doesn't take so long, maybe about an hour if you do everything right, but great desk, hope it doesn't break on me with my pc!