RIDGE WASHER Sewer Jetter Nozzle for Pressure Washer, 3 pcs Drain Cleaning Nozzle Tips Kit for Drain Jetting Hose Stainless Steel, Rotating Button Nose with 1/4'' Quick Connect, 5000 PSI

They all work great and do a great job for cleaning inside the frame rails of my vehicles. Two thing to note, Expect to get wet when using them and careful when removing the nozzle from the frame. No fault to the product but the quick release will pop the noddle off quite easily when pulling it out from the frame. So be careful if you use it for that. Otherwise you will need to get creative with some magnets and some fancy finger work hahaha

I used these to clean out my gutter drains and was amazed what came out. Highly recommended!

I wanted a more pointed nozzle to dislodge a blockage in a house to street sewer line and this worked great. I bought all four pieces here to be well stocked with new nozzles and adaptors. It fit perfectly (1/4 inch NPT hose) and went on easily. There were no reviews but I looked at the other products this company sells and they look fine. Item arrived quickly. I let the jetter hose and nozzle sink into the blockage and then yank quickly. Repeat and rinse. It dislodged a (very) little more each time and then, the moment happens, when the entire mess comes rushing down. It can take a while (hours) but I got lucky in 30 min or so. Worked great. I recommend.

Just as advertised

The jets got the job done. The spinner would get dirt in it and it would stop spinning, but it was easy to clean and get functional again. The jets pulled 75 feet of 3/8" pressure hose into my four inch drain line and washed the dirt out. I cleaned a storm sewer drain. I did have to push the hose in the last little bit but the nozzle kept it all moving down the pipe. I did have to go to the hardware store and get some fittings to go from the 1/4 inch fittings to my 3/8 inch fitting on my hose, but in the end, it was a lot cheaper than calling in the pros!

Blasted through the funk on a 4" PVC pipe. I'm not sure why Jetter nozzles cost so much but my sales person wanted $800. I bought this and it may not be as good but I wouldn't know. Cut through the build up.

They work pressure isnt as good as expected believe water volume is higher then they advertise

Works best with a substantial pressure washer. I would suggest a 3000 psi or better pump. Nice short tips for making tight turns and a variety of blast patterns for various types of clogs.

fameux comme kit.